ESTIMATION DE LA PUISSANCE PHOTOVOLTAÏQUE A PARTIR DES MESURES DES PARAMETRES EXTERNES

Authors

  • SOUAD BELHOUR Université Constantine 1
  • ABDELOUAHAB ZAATRI Université Constantine 1

Keywords:

Puissance photovoltaïque, énergie photovoltaïque, éclairement, température

Abstract

On étudie l’influence des paramètres externes de l’environnement (l’éclairement, la température,  la vitesse du vent) en vue d’estimer la puissance d’un système photovoltaïque à base de cellules de Silicium monocristallin. Pour une région donnée, les mesures sur l’environnement sont obtenues sur site ou à partir de mesures météorologiques. Le modèle d’estimation de la puissance est celui proposé en [1].Qui permet de déterminer la puissance maximale en fonction de l’éclairement et de la température. Un programme informatique a été développé sous forme d’interface graphique utilisateur qui permet d’évaluer la puissance photovoltaïque maximale journalière, mensuelle et annuelle à partir des mesures ou d’estimations.

Downloads

Download data is not yet available.

Author Biographies

SOUAD BELHOUR, Université Constantine 1

Département de Physique

ABDELOUAHAB ZAATRI, Université Constantine 1

Département de Mécanique, Laboratoire (LATA)

References

Lin Lu, « Investigation on Characteristics and Application of Hybrid Solar/Wind Power Generation Systems », Ph.D Thesis, the Hong Kong Polytechnic University, 2004.

R.P. Mukund, « Wind and solar Power Systems », Ph.D, P.e U.S merchant Marine Academy, Kings Point, New York, CRC Press LLC 1999.

Jones, C.P Underwood.2002 « Amodeling mrthod for building-integrated PV systems. Solar Energy », 70 (4):349-359.

Markvard, T., 2000. Solar Electricity, second ed. Willey, USA.

S. Diaf, D. Diaf, M. Belhamel, M. Haddadi, A. Louche, « A Methodology for Optimal Sizing of Autonomous Hybrid PV/Wind System », Energy Policy, Vol. 35, N°11, pp. 5708 – 5718, 2007.

The Bogdan, S.B., Salameh, Z.M., 1996. « Methodology for optimally sizing the combination of a battery bank and PV array in a wind/PV hybrid system ». IEEE Transactions on Energy Conversion 11 (2), 367–375.

A. Zaatri et S. Belhour, « Reconstitution de la caractéristique I – V et détermination de la puissance d’un système photovoltaïque », Revue des Energies Renouvelables Vol. 12 N°4 (2009) 563 – 574, (reçu le 31 Août 2009 – accepté le 25 Décembre 2009).

D.L. King, J.A. Kratochvil, W.E. Boyson and W.I. Bower, ‘Field Experience with a New Performance Characterization Procedure for Photovoltaic Arrays’, Sandia National Laboratories, Albuquerque, New Mexico, USA.

A.D. Jones and C.P Underwood, ‘A Modelling Method for Building-integrated Photovoltaic Power Supply’, Building Services Engineering Research and Technology, Vol. 23, N°3, pp. 167 - 177, 2002

Lin Lu and H.X. Yang, «A Study on Simulation of the Power Output and Practical Models for Building Integrated Photovoltaic Systems », ASME Journal of Solar Energy Engineering, Vol. 126, N°3, pp. 1-7, 2004.

M. Belhadj, T. Benouaz… «Estimation de la puissance maximale produite par un générateur photovoltaïque », Revue des Energies enouvelables Vol. 13 N°2 (2010) 257 – 264(reçu le 10 Janvier 2010 – accepté le 28 Juin 2010)

T. Markvart, « Solar Electricity », John Wiley & Sons, Chichester, 1994.

Published

2013-06-01

How to Cite

BELHOUR, S., & ZAATRI, A. (2013). ESTIMATION DE LA PUISSANCE PHOTOVOLTAÏQUE A PARTIR DES MESURES DES PARAMETRES EXTERNES. Sciences & Technology. A, Exactes Sciences, (37), 9–13. Retrieved from https://revue.umc.edu.dz/a/article/view/1922

Issue

Section

Articles

Similar Articles

1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.