PERFORMANCE DES POTEAUX EN BETON ARME RENFORCES PAR CHEMISAGE EN ACIER

Auteurs-es

  • Abdesslem CHAIR Université des Frères Mentouri Constantine
  • Abdesselam BOUROUZ Université des Frères Mentouri Constantine
  • Nabil DJEBBAR Université des Frères Mentouri Constantine

Mots-clés :

Performance, résistance, ductilité, chemisage en acier, béton

Résumé

Les colonnes en béton confiné par chemise en acier peuvent être utilisées comme élément composant un système structurel, vu leur excellente capacité d’absorption et de dissipation d’énergie, conduisant à une optimisation remarquable des matériaux mis en œuvre. De même la chemise en acier peut être utilisée comme outil de réparation pour un éventuel renforcement ou réhabilitation structurelle, offrant ainsi une meilleure flexibilité au concepteur.

Cependant ce type d’élément structurel n’est pas encore réglementairement couvert. Le travail présenté s’inscrit dans l’optique de faire ressortir leur performance structurelle. Il consiste en la présentation d’une synthèse sur les principaux modèles caractérisant les lois de comportement du béton confiné par chemise en acier, tout en mettant en évidence les paramètres influents.

Une investigation numérique faisant ressortir la capacité sectionnelle d'une section en béton renforcée par chemisage en acier a aussi été menée. Les résultats obtenus ont permis la comparaison avec ceux obtenus par des codes de notoriété internationale.

Bibliographies de l'auteur-e

Abdesslem CHAIR, Université des Frères Mentouri Constantine

Laboratoire des Matériaux et Durabilité des Constructions

Abdesselam BOUROUZ, Université des Frères Mentouri Constantine

Laboratoire des Matériaux et Durabilité des Constructions

Nabil DJEBBAR, Université des Frères Mentouri Constantine

Laboratoire des Matériaux et Durabilité des Constructions

Références

Susantha K. A. S., Hanbin G., Usami T., ‘Uniaxial Stress-Strain Relationship of Concrete Confined by Various Shaped Steel Tubes’, Engineering Structures, 23 (2001) 1331-1347.

Eurocode 4. ‘Design of composite steel and concrete structures. Part 1.1, General rules for buildings’ ENV 1994-1-1. London (UK): British Standards Institution; 1994

Building code requirements for structural concrete and commentary, ACI 318-99. Detroit (USA): ACI 1999.

Tomii M., ‘Ductile and Strong Columns Composed of Steel Tubes Infilled Concrete and Longitudinal Steel Bars’, Proc., 3rd Int. Conf. on Steel – Concrete Composite Structures, Fukuoka, Japan, 1991 [Special Volume].

Liang Q, and Uy B., ‘Theoretical Study of the Post-local Buckling of Steel Plates in Concrete Filled Box Column’ Computers and Structures, 75 [5] (2000).

Bradford M.A, Loh H.Y and Uy B., ‘Slenderness Limits for Circular Filled Steel Tube Column’ Journal of Structural Engineering, 125 [9] (2002), 1009-1019.

Huang C.S et al., ‘Axial Load Behavior of Stiffened Concrete Filled Steel Column’ Journal of Structural Engineering 128 [9] (2002), 1222-1230.

Morino S. and Tsuda K., ‘Design and Construction of Concrete Filled Steel Tube Column System in Japan’ Earthquake Engineering and Earthquake seismology, 4 [1] (2002), 52-73.

Hu HT, Huang CS, Wu MH, Nonlinear Analysis of Axially Loaded Concrete – Filled Tube Columns with Confinement Effect, Journal of Structural Engineering, ASCE 2003; 129; 1322-9.

Han LH, Concrete – Filled Tube Columns, Science Publishing Company, 2004.

Ehab E., Young B., Behaviour of Normal Strength Concrete-Filled Compact Steel Tube Circular Stub Columns, Journal of Constructional Steel Research. 62(2006) 706-715.

Y.Sun. Proposal and Application of Stress-Strain Model for Concrete Confined by Steel Tubes, the 14th World Conference on Earthquake Engineering October 12-17, 2008 Beijing, China

P.Gajalaksmy, H .Jane Helena and R.Srinivasa B.S Abdur Rahman ‘Experimental Investigation on the behavior of concrete –filled steel columns’. Asian Journal of Civil Engineering Vol 12 N°6(2011) pages 391-701

Giakoumelis G, Lam D. Axial capacity of circular concrete-filled tube columns. Journal of Constructional Research 2004, 60(7): 1049-68.

Tomii M, Yoshimura K, Morishita Y. ‘Experimental Studies on Concrete Filled Steel Tubular Stub Columns under Concentric Loading’. Int. Colloquium on stability of structures under statically dynamic load; Washington, DC, 1977: 718-41.

Mander J. B., Priestley M. J. N., Park R., ‘Theoretical Stress-Strain Model for Confined Concrete’, Journal of Structural Engineering, Vol.114, No. 8, August 1988b, pp. 1804-1826.

Saenz LP, Discussion of Equation for Stress-Strain Curve of Concrete, by Desayi P. and Krishnan S. Journal of the American Concrete Institute, 1964, 1229 – 35.

Popovics S., A Numerical Approach to the Complete Stress-Strain Curve Concrete, Cement and Concrete Research, vol. 3, 1973, pp. 583-599.

Tokinoya H., Kanoh Y, Fukumoto N, Murata Y, Fujimoto T, Mukai A, Structural Behaviour of Concrete Filled Steel Tubular Columns Axial Compressive Load, part 3m test results on circular columns. In .Abstracts of the annual Convention of the Architectural Institute of Japan, 1995: 739-40 (in Japanese).

Téléchargements

Publié-e

2017-06-01

Comment citer

CHAIR, A., BOUROUZ, A., & DJEBBAR, N. (2017). PERFORMANCE DES POTEAUX EN BETON ARME RENFORCES PAR CHEMISAGE EN ACIER. Sciences & Technologie. B, Sciences De l’ingénieur, (45), 16–24. Consulté à l’adresse https://revue.umc.edu.dz/b/article/view/2250

Numéro

Rubrique

Articles

Articles les plus lus du,de la,des même-s auteur-e-s

Articles similaires

1 2 3 4 5 6 7 > >> 

Vous pouvez également Lancer une recherche avancée d’articles similaires à cet article.