EFFECT OF STRAIN RATE ON MICROSTRUCTURE OF A LOW CARBON STEEL WIRE
Keywords:
Low carbon steel, deformation, wiredrawing, microstructure, recrystallization, Acier à bas carbone, déformation, tréfilage, recristallisationAbstract
The commercial importance of low alloy carbon steels is due to their plastic deformation properties. These properties allow them to be formed into useful shapes such as wires. The present steel is produced by Trifisoud- Setif –Algeria and used for wiring. It is a low carbon steel wire containing mainly (weight %) 0.05%C, 0.3%Mn, 0.1%S and 0.12%Cr and is supplied as rods. The optical microscopic and SEM analyses are used to identify themicrostructure of the material in as received and deformed conditions. It is found that tensile properties depend on the wiredrawing area reduction (τw). The annealing temperatures and the grain size are determined; they also vary with τw .
Downloads
References
G. E.Dieter, ” Mechanical Metallurgy” 3rd Edition , McGraw Hill book company, 1986, pp197-198.
J.Philibert, A.Vignes, Y. Beéchet, and P;Combrade "Métallurgie du minerai au matériau", Ed. Masson, Paris, 1998, pp. 776-776
S. Tandon, S. p. Deshmukh, R. S. Mishra, and K.Krishnamurthy and R. Tayloe, " Fracture criteria prediction in wiredrawing using finite element modeling", Wire Journal International, January, 2006,pp58-62.
M.Gagné and E. Thibault, "Control of inclusion characteristics in direct cast steel billets", Canad..Met. Quarterly., vol. 38, N°.5, 1999, pp. 311-321
A. Cottrell "An introduction to metallurgy" ,ELBS Arnold, 2nd Edition , London, 1982.
"ASTM Standard Designation“ E112-88.,1994, book of ASTM standard, vol.301, ASTM, Philadelphia, P, A 1997, pp227.
B.Yalamanshili, P.M.Power, and D.Landham, “A technical review of industrial practices for decreasing the strain hardening rate of low carbon steel”, Wire Journal International, July 2005, pp108-111.
H.Bouhalais and Z.Larouk " Microstructure characterisation of a low carbon steel wire" JMSM2006, Meknès, 24-26 Novembre 2006, pp. 272.
R.W.K. Honeycombe "The Plastic deformation of metals", Edward Arnold Ltd, London, 1994.
F.M. Guclu and H. Cimenoglu "The Recrystallization Behaviour Of CP-Titanium", Materials Science Forum Vols. 467-470, 2004, pp.459-464.
J.Philibert, A.Vignes, Y. Beéchet, and P; Combrade, " Métallurgie du minerai au matériau", Ed. Masson, Paris, 1998, pp768-769.
