EXPERIMENTAL STUDY OF THE MECHANICAL BEHAVIOR OF CARBON FIBER FABRICS REINFORCED THERMOPLASTIC AND THERMOSET COMPOSITES MATERIALS
Mots-clés :
Experimental study, epoxy, PPS, carbon fiber fabrics, bolted joint testsRésumé
In order to tackle the issues associated with the use of thermosetting resins (storage, difficult reticulation process, handmade draping, irreversible defects), high performance thermoplastic resins
are now being considered for applications in aeronautics. Indeed, it is possible to get thermoplastic based laminates with various shapes in few stages thanks to a thermoforming process. Thus, their
mechanical behavior needs to be investigated. This study aims at comparing the mechanical behavior of two aeronautical laminates submitted to different stress states. The studied composite materials
consist of two different materials for the matrix : epoxy (thermosetting resin) or PPS (high performance thermoplastic resin). The matrix was reinforced with the same carbon fiber satin
fabrics. Beyond the usual tests performed on composite materials to get the elastic properties, singlebolt double lap bolted joint (bearing test) and single-bolt single lap bolted joint tests were carried
out. Such tests are very important for the design of composite laminates usually joined with bolts or rivets for aeronautical applications.
Références
J. Awerbuch, M.S. Madhukar. Notched strength of composite
laminates: predictions and experiments - A review. J.
Reinforced Plastics and Composites, 4, pp. 3-159, 1985.
L.A. Carlson, C.G. Aronsson and J. Backlund. Notch
sensitivity of thermoset and thermoplastic laminates loaded in
tension. Journal of materials science, 24, pp.1670-1682, 1989.
B.A. Simonds and W.W. Stinchcomb. Response of notched
AS4/PEEK laminates to tension/compression loading.
Advances in Thermoplastic Matrix Composite Materials,
ASTM STP 1044,1989
M.H.R Jen, Y.C. Tseng, S.C. Chang, and M. Chen.
Mechanical properties in notched AS4/PEEK APC2
composite laminates at elevated temperature. J. of Composite
Materials, 40(11), pp. 955-969, 2006
M.H.R. Jen, Y.C. Tseng, and W.H. Lin. Thermo-mechanical
fatigue of centrally notched and unnotched AS4/PEEK APC2
composite laminates. Int. J. Fatigue, 28(3), pp. 901-909, 2006
P.A. Lagace, N.V. Bhat, and A. Gundogdu. Response of
notched graphite/epoxy and graphite/PEEK systems.
Composite Materials : Fatigue and Fracture, ASTM STP
, 1993
S.M. Spearing, P.W.R. Beaumont, and M.T. Kortschot. The
fatigue damage mechanics of notched carbon fibre/PEEK
laminates. Composites, 23(5), pp. 305-311, 1992.
E.G. Guynn, W.L. Bradley, and W. Elber. Micromechanics of
compression failures in open hole composite laminates.
Composite Materials: Fatigue and fracture, ASTM STP 1012,
nd volume, 1989.
R. F. Karlak, Hole effects in a related series of symmetrical
laminates, Proc. 4th Joint ASME-Metallurgical Society of
AIME Symp. on Failure Modes in Composites, Chicago, pp.
-117, 1977.
S.J. Lubowinski, E.G. Guynn, W. Elber, and Withcomb J.D.
Loading rate sensitivity of open-hole composite specimens in
compression. Composite Materials : Testing and Design,
ASTM STP 1059, 1990.
F. Touchard-Lagattu and M. C. Lafarie-Frenot. Damage and
inelastic deformation mechanisms in notched thermoset and
thermoplastic laminates. Composites Science and Technology,
(5), pp. 557-568, 1996.
F. Lagattu, M.C. Lafarie-Frenot, T.Q. Lam, and J. Brillaud.
Experimental characterisation of overstress accommodation in
notched CFRP composite laminates. Composite Structures,
, pp. 347-357, 2005.
M. Kawai, M. Morishita, K. Fuzi, T. Sakurai and K.
Kemmochi. Effects of matrix ductility and progressive
damage on fatigue strengths of unnotched and notched carbon
fibre plain wowen roving fabric laminates. Composites : Part
A, 27A, pp. 493-205, 1996.
J. Ekh.Multi-Fastener Single-lap Joints in Composite
Structures. PhD thesis of the Royal Institute of Technology,
ISBN n° 91-7178-396-2, Stockholm, Sweden, 2006.
T. Yylmaz and T. Synmazcelik. Investigation of load bearing
performances of pin connected carbon/PPS composites under
static loading conditions. Materials and Design, 28, pp. 520-
, 2007.
B.L. Denq, W.Y. Chiu, and HC. Tseng. Influence of edgedistance
ratio and hole-size ratio on bearing strength of PEEK
and its composites. J. of Applied Polymer Science, 66(10), pp.
-1853, 1997.
P. Vautey and Favre J.P. Fibre/matrix load transfer in
thermoset and thermoplastic composite - simple fibre models
and hole sensitivity of laminate. Composites Sciences &
Technology, 38, pp. 271-288, 1990.
Polymer Matrix Composites. Volume 3. Materials
usage, design and analysis. Military Handbook. 17 –
E, 3, 1997.
Téléchargements
Publié-e
Comment citer
Numéro
Rubrique
Licence
Les auteurs publiant dans cette revue acceptent les termes suivants :- Les auteurs détiennent le droit d'auteurs et accordent à la revue
le droit de première publication, avec l’ouvrage disponible simultanément [SPÉCIFIER LA PÉRIODE DE TEMPS] après publication, sous la licence Licence d’attribution Creative Commons qui permet à d'autres de partager l'ouvrage en en reconnaissant la paternité et la publication initiale dans cette revue. - Les auteurs peuvent conclure des ententes contractuelles additionnelles et séparées pour la diffusion non exclusive de la version imprimée de l'ouvrage par la revue (par ex., le dépôt institutionnel ou la publication dans un livre), accompagné d'une mention reconnaissant sa publication initiale dans cette revue.
- Les auteurs ont le droit et sont encouragés à publier leur ouvrage en ligne (par ex., dans un dépôt institutionnel ou sur le site Web d'une institution) avant et pendant le processus de soumission, car cela peut mener à des échanges fructueux ainsi qu'à un nombre plus important, plus rapidement, de références à l’ouvrage publié (Consulter The Effect of Open Access).
