A THREE-DIMENSIONAL INVERSE COMPUTATION FOR THE DESIGN OF TURBOMACHINERY

المؤلفون

  • N SETTOU Université de Ouargla, Algérie
  • A ATIF USTHB, Bab-Ezzouar, Alger
  • S BENMANSOUR USTHB, Bab-Ezzouar, Alger
  • M KADJA Université Mentouri Constantine

الكلمات المفتاحية:

Inverse computation، Design، Turbomachinery

الملخص

A practical quasi-three dimensional inverse computation model is developed for the design of  turbopump under the assumption of inviscid incompressible flow. The three-dimensional flow through impellers is decomposed into a circumferentially averaged mean flow and a periodic flow according to flow periodicity. In this computation the blade geometry of impeller is designed according to specified blade bound circulation distribution and normal thickness distribution on a given meridional geometry. In the first step, we use the meridional stream function to define the flow field. The governing equation is deduced from the relation between the azimuthal component of the vorticity and the meridional velocity. In the second step, the inverse problem corresponding to the blade to blade flow confined in each stream sheet is analyzed. The blade geometry is determined according to a specified blade bound circulation distribution by iterative computation of S2 and S1 surfaces.

السير الشخصية للمؤلفين

N SETTOU، Université de Ouargla, Algérie

Département de Génie Mécanique
Faculté des sciences de l’ingénieur

A ATIF، USTHB, Bab-Ezzouar, Alger

Laboratoire de Mécanique Avancée

S BENMANSOUR، USTHB, Bab-Ezzouar, Alger

Laboratoire de Mécanique Avancée

M KADJA، Université Mentouri Constantine

Laboratoire de Mécanique

المراجع

- Bauer F., Garabedian P., Korn D., "Supercritical Wings Sections III", Springer-Verlag, New York, (1977), pp. 1-12.

- Leonard O., "Subsonic and Transonic Cascade Design", AGARD-VKI R780 Special course, on Inverse method in airfoil design for aeronautical and Turbomachinery applications, Rhode-Saint-Genèse, Belgium, May (1990), pp. 1-18, 14-18.

- Borges J.E., "A Three-dimensional Inverse Method for Turbomachinery: Part 1 Theory", ASME Journal of Turbomachinery, Vol. 112, (1994), pp. 346-354.

- Lin R.C., Peng G.Y., "An Advanced Three-Dimensional Inverse Model for the Design of Hydraulic Machinery Runner", ASME Proc., FED-Vol. 245, FEDSM98-4867, (1998), pp. 1-7.

- Zanegeneh M., Goto A., Takemura T., "Suppression of Secondary Flows in a Mixed-Flow Pump Impeller by Application of Three-Dimensional Inverse Design Method : Part 1- Design and Numerical Validation", ASME Journal of Turbomachinery, Vol. 118, (1996), pp. 536-543.

- Zhao X.L., Sun C.L., Wu C.H., "A Simple Method for Solving Three-dimensional Inverse Problems of Turbomachine Flow and Annular Constraint Condition", ASME paper 84-GT-198, (1984).

- Xu J..Z., Gu W., "A Numerical Procedure of Three-dimensional Design Problem in Turbomachinery", ASME Journal of Turbomachinery, Vol. 114, (1992), pp. 548-582.

- Zanetti L., Larocca F., Marsibio R., "Euler Solver for 3D Inverse Problems", Proceedings, Advanced and Application in Computational Flud Dynamics, ASME FED-Vol. 66, (1988), pp.71-79.

- Settou N., Mahi R, "Contribution à la conception des pompes centrifuges par la méthode de la dynamique du rotationnel en écoulement axisymétrique", Quatrièmes Journées Maghrébines d’Etudes en Génie Mécanique, 28-30 Nov. (1999), Constantine, pp.72-78.

- Settou N., Atif A., Benmansour S. "Turbomachine Blading Designed by Solving the Inverse Problem", The Fifth Maghrebine Conference for Mechanical Studies, 5-7 February (2001), Sabha University, pp. 58-67.

- Zanetti L., "Inverse Methods for 3D Internal Flows", AGARD-VKI Special course on Inverse method in airfoil design for aeronautical and turbomachinery applications, Rhode-Saint-Genèse, Belgium, 14-18 May (1990).

- Horlock J.H., "An Entropy Production in Adiabatic Flow in Turbomachines", J. of Basic Eng. Tr. ASME serie D, (1984), pp. 587-593.

- Wu C.H., "A General Theory of Three Dimensional Flow in Subsonic and Supersonic Turbomachines of Axial, Radial and Mixed Flow Type", NACA TN 2604, (1952).

التنزيلات

منشور

2003-12-01

كيفية الاقتباس

SETTOU, N., ATIF, A., BENMANSOUR, S., & KADJA, M. (2003). A THREE-DIMENSIONAL INVERSE COMPUTATION FOR THE DESIGN OF TURBOMACHINERY. مجلة علوم و تكنولوجيا ب، علوم الهندسة, (20), 57–62. استرجع في من https://revue.umc.edu.dz/b/article/view/1258

إصدار

القسم

Articles

المؤلفات المشابهة

1 2 > >> 

يمكنك أيضاً إبدأ بحثاً متقدماً عن المشابهات لهذا المؤلَّف.